Reasons beyond these TiVo Media’s network messages

Being a user of TiVo if you face any error message from the below-given list then you need to check the reasons behind plus how to fix these issues. If you see no positive change in the issues then we recommend you contact professionals.

If you’re a TiVo user then let us tell that after completion of your set up procedure you need to make the connection between your TiVo and your network. Make sure that your router, modem, and the system is working accurately with your Internet Service Provider. If you have installed security measures on the network then check that your device should make you able to share data with your TiVo Service (The Internet is essential). For more support, you can get in touch with professionals. Below we have some error messages, if you are one of them those who’re facing any of these messages then we’ll tell the reason why you’re facing these messages.

No network adaptor (N01)

If you’re struggling with this message means your TiVo is unable to recognize a Wireless Adaptor. Kindly check your USB port, break the connection between your Wireless Adaptor and TiVo and by plugin out the cable and then plug it back again.

No DHCP server (N02)

If this message is annoying you it’s mean your network is unable to locate DHCP.

1.You need to check that your router’s DHCP settings are in the state of proper configuration.

2. All the wired network users, they need to check their Ethernet cable properly.

3. Take a glimpse at the password if you’re encrypted wireless network user.

DHCP lease denied (N03)

This message indicates that your IP address is unable to get supply from DHCP.

1.You can re-connect after waiting of few minutes.

2. You need to expand the IP addresses’ number that you can assign to your DHCP.

DHCP error (N04)

Simply this error indicates that there’s an issue with DHCP.

• You just need to make sure that your settings of DHCP are accurate and in the proper state of configuration.

Duplicate IP address (N05)

If you’re facing this message it means your TiVo media’s IP address indicates that some other network is using your IP address.

• You need to change the settings.

Wireless network not found (N06)

When your TiVo media can’t see the chose wireless network then this issue occurs.

1. Your wireless network should be in the state of working, configuration holds no flaw and signal strength should be good.

2. You need to make some essential changes such as credentials of your network.

3. While accessing control list you must ensure that MAC ID of your TiVo Wireless Adaptor should be on the list. You can take a glimpse at your adaptor’s bottom to check the MAC ID.

4. Remember some other device such as microwave ovens or cordless phones can also disturb the signal.

5. You can attempt rebooting step.

Gateway not found (N07)

This message indicates that there’s not the connection between your TiVo and gateway.

1.You need to check that network should be in working mode and configuration should be appropriate.

2. All the encrypted wireless users, you need to check that your credentials shouldn’t hold any flaw.

3. You can also attempt rebooting step.

Gateway not configured (N09)

Being a user of TiVo device if you do a selection of static IP address but there’s some flaw in your filled gateway address or some error in the configuration then this error occurs.

1.You need to take a glance at your router and check that configuration holds no inaccuracy.

2. You can attempt the process of rebooting.

Access point not found (N10)

When the connection between TiVo device and your chose router meets failure then this issue or message occurs in front of you.

1. Firstly, check your router properly and make sure that configuration holds no error.

2. If you’re using wireless network settings then ensure it should be appropriate with no flaw plus don’t forget to check encryption key.

3. Your signal strength should be good and strong.

4. You can attempt rebooting.